RTS EKP-3016, Техническое руководство, Страница: 128 / 164

130 KP-3016/3016A Menu System KP-3016/KP-3016A Series
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
1.
Using the AUX/MENU shaft encoder, select Netmask .
2.
Press the SEL button .
The Netmask Address appears with the first octet blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, enter the first octet number in the Netmask Address.
4.
Press the SEL button .
The focus shifts to the second octet .
5.
Using the AUX/MENU shaft encoder, enter the second octet number in the Netmask Address.
6.
Press the SEL button .
The focus shifts to the third octet .
7.
Using the AUX/MENU shaft encoder, enter the third octet number in the Netmask Address.
8.
Press the SEL button .
The focus shifts to the last octet .
9.
Using the AUX/MENU shaft encoder, enter the last octet number in the Netmask Address.
10.
Press the SEL button .
The RVON Setup menu options appear in the panel display .
11.
Press CLR to exit menu mode.
To configure the Domain name , do the following:
1.
Using the AUX/MENU shaft encoder, select Domain .
2.
Press the SEL button .
The domain name appears with the first character blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, select a new character at the current position .
4.
Press the SEL button .
5.
Using the AUX/MENU shaft encoder, move to the next or previous character position .
6.
Press SHIFT to insert a character at the current position.
7.
Press the SEL button
OR
Press the
AUX shaft encoder to move to the next character.
NOTE: Press the MAIN shaft encoder to cancel editing. A confirmation is required.
8.
Repeat steps 3 to 6 until the domain is named.
9.
Once finished, press the SEL button .
Save Name? appears in the panel display.
10.
Press the SEL button .
To configure DNS Server, do the following:
1.
Using the AUX/MENU shaft encoder, select DNS Server .
2.
Press the SEL button .
The DNS Server Address appears with the first octet blinking in the panel display.
3.
Using the AUX/MENU shaft encoder, enter the first octet number in the DNS Address.
4.
Press the SEL button .
The focus shifts to the second octet .
5.
Using the AUX/MENU shaft encoder, enter the second octet number in the DNS Address.
6.
Press the SEL button .
The focus shifts to the third octet .
7.
Using the AUX/MENU shaft encoder, enter the third octet number in the DNS Address.
8.
Press the SEL button .
The focus shifts to the last octet .