RTS EKP-3016, Техническое руководство, Страница: 108 / 164

110 KP-3016/3016A Menu System KP-3016/KP-3016A Series
Bosch Security Systems, Inc. Technical Manual F.01U.315.927 Rev. 02
Key Assign Menu, Pt-to-Pt
Pt-to-Pt assigns a key that talks or listens to another intercom port.
NOTE: Some Pt-to-Pt destinations may be non-keypanel devices that cannot activate talk and listen paths. Therefore, if
you want full communication, you may need to assign both talk and listen on the key. For more information, see
“Key Assign Menu, Auto Func” on page 113.
To assign Pt-to-Pt to the keypanel key , do the following:
1.
Starting at the Key Assign|Pt-to-Pt menu, select the port you want to assign to the keypanel key.
2.
Press the SEL button .
A list of auto-functions appear .
3.
Using the AUX/MENU shaft encoder, select the auto-function you want to assign to the Pt-to-Pt assignment, if
applicable.
4.
Press the SEL button .
Tap Key appears in the panel display.
5.
Press down on the keypanel key position where you want the Pt-to-Pt assignment to appear.
The key color changes and the alpha appears on the key .
Key Assign Menu, Party Line
Party Line assigns a key that talks and/or listens to a party line. Party Lines are defined in AZedit.
NOTE: Party Line members are usually non-keypanel devices that cannot activate talk and listen paths. Therefore, if you
want full communication, you need to assign both talk and listen on the key. If all communications are normally
2-way, you may wish to assign the key as Talk+Auto Listen.
To assign a Party Line to the keypanel key , do the following:
1.
Starting at the KeyAssign|Party Line menu, select the party line you want to assign to the keypanel key.
2.
Press the SEL button .
A list of auto-functions appear .
3.
Using the AUX/MENU shaft encoder, select the auto-function you want to assign to the Party Line assignment, if
applicable.
4.
Press the SEL button .
Tap Key appears in the panel display.
5.
Press down on the keypanel key position where you want the Party Line assignment to appear.
The key color changes and the alpha appears on the key .
Key Assign Menu, IFB
IFB assigns the IFB assignment type to a key. By default, all IFBs are restricted. You must select the appropriate scroll enable
check box in AZedit, to see IFBs.
To assign an IFB to the keypanel key , do the following:
1.
Starting at the KeyAssign|IFB menu, select the IFB assignment you want to assign to the keypanel key.
2.
Press the SEL button .
A list of auto-functions appear .
3.
Using the AUX/MENU shaft encoder, select the auto-function you want to assign to the IFB assignment, if
applicable.
4.
Press the SEL button .
Tap Key appears in the panel display.
5.
Press down on the keypanel key position where you want the IFB assignment to appear.
The key color changes and the alpha appears on the key .