Royal ts1200mw Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 158

background image

TS1200MW User’s Guide 128

CAUTIONS AND WARNINGS

• Should you drop the cash register and damage it, immediately shut down

the power and unplug the AC plug from the power outlet. Continued use
creates the danger of shorting, fire and electric shock.

• Attempting to repair the cash register yourself is extremely dangerous.

Contact a Royal service representative. Never try to take the cash register
apart or modify it in any way. Contact a Royal service representative for
all repair and maintenance.

• High-voltage components inside the cash register create the danger of

fire and electric shock.

• Use only a proper AC electric outlet. Using an outlet with a

different voltage from the rating creates the danger of malfunction, fire,
and electric shock. Overloading an electric outlet creates the danger of
overheating and fire.

• Make sure the power plug is inserted as far as it will go. Loose plugs

create the danger of electric shock, overheating, and fire. Do not use the
cash register if the plug is damaged. Never connect to a power outlet that
is loose.

• Use a dry cloth to periodically wipe off any dust built up on the prongs of

the plug. Humidity can cause-poor insulation and create the danger of
electric shock and fire if dust stays on the prongs.

• Do not allow the power cord or plug to become damaged, and never try

to modify them in any way. Continued use of a damaged power cord can
cause deterioration of the insulation, exposure of internal wiring, and
shorting, creating the danger of electric shock and fire. Contact a Royal
service representative if the power cord or plug requires repair or
maintenance

Caution

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE

• The battery should only be replaced by a certified technician at an

authorized service center.

• Replace only with the same type of battery recommended by the

manufacturer.

• Properly dispose of all used batteries according to the battery

manufacturer's instructions or according to your local environmental
regulations and disposal guidelines.

•

Never

dispose of any batteries in fire! The batteries may leak or explode.

• The back-up power system: When you are not using your cash register,

keep it plugged in with the cash register turned OFF. If the unit is
unplugged, back-up power for the memory is provided through the

«
...
133
134
135
136
137
...
»

Содержание ts1200mw































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ts1200mw

Бренд: MZ electronic Страницы: 16

Бренд: Casio Страницы: 91

Бренд: NanoEnTek Страницы: 40

Бренд: IBM Страницы: 42

Бренд: Xiamen Страницы: 37

Бренд: Nautilus Hyosung Страницы: 28

Бренд: TEC Страницы: 36

Бренд: Casio Страницы: 134

Бренд: Cashmaster Страницы: 2

Бренд: V-Count Страницы: 57

Бренд: HP Страницы: 328

PC-EFTPOS NPT-710

Бренд: Westpac Страницы: 26

Бренд: VISIONARY DESIGNS Страницы: 2

Бренд: Kuebler Страницы: 24

Бренд: Hussmann Страницы: 32

Бренд: Fricosmos Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды