Rowe Scan 450i 24 inch KIT 40, Руководство по эксплуатации

Страница: 17 / 146

16
1.4 Unpacking of Device
In order to install the scanner, a space of at least 2.5 m x 2.0 m is required which meets with the
ambient conditions described in Annex B.3.1 (Page 130). When unpacking the scanner, do not lift
it by grabbing the side boxes (see Figure 1.4).
Figure 1.4: Unpacking of ROWE Scan 450i
Before installing the device, check the consignment for completeness. Check the scope of supply
by means of the list in Chapter 1.2 on Page 9.
Visible damages are to be notified in writing by a corresponding comment on the consignment
note. Otherwise, payment of damages by the carrier is excluded.
In order to avoid damages to the device, please do not place any tools, components,
or the like on the scanner!
1.5 PC Requirements
Use of the scanner requires connection of a PC (not included in the scope of supply). This PC shall
comply with the minimum requirements mentioned in
Fehler! Verweisquelle konnte nicht
efunden werden. . However, we recommend compliance with the optimum requirements to
benefit from optimum performance.
Component Minimum requirements
ROWE Scan 450i
Optimum requirements
ROWE Scan 450i
CPU 1.66 GHz Dual-Core 3.0 GHz Quad-Core
Memory 2.0 GB 4.0 GB