Rottler P69AHD Скачать руководство пользователя страница 40

Страница: 40 / 210

Section 4 Control Definitions

P69AHD Manual

www.rottlermfg.com

4-1

Control Definitions

The purpose of this chapter is to define the function of the buttons throughout the various screens.

Certain button functions may not make sense right away in this chapter. As the operator reads through

the Operating Instructions chapter of this manual, the function of these buttons will become clear.

Computer and Controller System Safety

The computer and controller are located in the main rear electrical enclosure. This unit is a full computer,

running Windows 7 64 Bit operating system. Contact the factory if more information on the computer

system is required.

IMPORTANT:

The computer in this machine has the ability to connect to the World Wide Web via

Ethernet or Wireless using a USB wireless adapter. This machine should NOT be connected to the

Internet for any reason other than getting a software update. This should ONLY be done when directed to

do so by a Rottler service technician. Updating Rottler Software when not directed by Rottler personnel

will result in a non-operational machine.

Any “IT” personnel should ALWAYS get approval from Rottler before doing ANYTHING on the computer.

This machine is capable of causing severe injury or death. Doing any

of the following without Rottler’s direct consent may cause severe

injury or death.

Connecting to the Internet for any other reason will leave the machine

vulnerable to viruses which could create a safety hazard and/or leave

the machine inoperable.

Downloading ANY program from the Internet or by other means when

not directed by Rottler is prohibited and will result in the machine

warranty being NULL and VOID.

Downloading any program or changing any Rottler or Computer

settings may cause the machine and/or software to become unstable.

DO NOT install ANY screen saver, Anti-Virus, Spyware or any type of Security software on the computer.

This could create a hazardous environment for the operator and personnel around the machine.

Performing any of the above will also result in the machine warranty being NULL and VOID.

DO NOT connect any type of external hardware to the computer via

USB or any other means. Do not install any type of Device Driver. This

could create a hazardous environment for the operator and personnel around the machine. Performing

any of the above will also result in the machine warranty being NULL and VOID.

Содержание P69AHD



















































































































































































































Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды

Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды