Rottler P69AHD Скачать руководство пользователя страница 32

Страница: 32 / 210

Section 3 Safety

P69AHD Manual

www.rottlermfg.com

3-1

Safety Information

For Your Own Safety Read This Instruction Manual Before Operating This Machine.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey

all safety messages that follow this symbol to avoid possible injury or death.

DANGER

indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not avoided,

could result in serious injury.

CAUTION

indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

CAUTION

used without the safety alert symbol indicates a potentially hazardous situation

which, if not avoided, may result in property damage.

Safety Instructions for Machine Use

This machine is capable of causing severe bodily injury

ONLY A QUALIFIED, EXPERIENCED OPERATOR SHOULD OPERATE THIS MACHINE

NEVER

ALLOW UNSUPERVISED OR UNTRAINED PERSONNEL TO OPERATE THE MACHINE.

Make sure

any instructions you give in regards to machine operation are approved, correct, safe, and clearly understood.

Untrained personal present a hazard to themselves and the machine. Improper operation will void the

warranty.

KEEP GUARDS IN PLACE

and in proper working order. If equipped with

doors, they must be in the closed position when the machine is in operation.

KEEP WORK AREA CLEAN

. Cluttered areas and benches invite accidents.

Содержание P69AHD



















































































































































































































Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды

Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды