Rottler P69AHD Скачать руководство пользователя страница 147

Страница: 147 / 210

Section 6 Maintenance

P69AHD Manual

www.rottlermfg.com

6-15

Check Spindle Chiller Level and Settings

The spindle on this machine is equipped with an oil chiller unit. This oil chiller acts as a reservoir and a

temperature regulator for the spindle. Once per month the chiller should be checked for proper settings

and oil levels.

To check the temperature settings, first press the ON/

OFF button until the “ROOM” LED is illuminated. This

will display he room temperature in Celsius. Next, hold

either of the ‘up/down’ buttons until the numbers on the

display flash. They will display a number between 15 and

-15. This number indicates the target oil temperature in

comparison to the room temperature. For best results this

number should display 3.0 in a room that has an average

temperature of 19.5 degrees(C) or lower, or -3.0 in a room

that has an average temperature of 20 degrees(C) or

higher. Press the “ON/OFF” button to save any changes.

The oil level sight glass is located on the bottom of the

oil cooler. This also has a mercury thermometer in it to

indicate oil temperature. This sight glass should be filled

to the black line at the top. If he oil is not filled to the black

line it must be topped off with air tool oil. The oil fill can

be reached by removing the air filter and two phillips head

screws located above the panel labeled “SUPPLY.”

Содержание P69AHD



















































































































































































































Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды

Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды