Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Страница: 95 / 210

Section 5 Operating Instructions P69AHD Manual
www.rottlermfg.com
5-51
Creating a Tool Path
Once we have a surface created for the combustion chamber that you are happy with the next step is to
create a tool path.
The chamber will be cut in three axis so to do so we will need to delete the pivot points for the top and
bottom planes, before we are able to create the tool paths.
Under chamber open up “closed sections” and then open up the “key closed sections” which are two one
for the top and the other for the bottom section.
Under each of the “key closed sections” click and highlight the “pivot points” then press the delete key on
the keyboard. It will ask if you are sure you want to delete it, chose “yes”
To create a tool path for the chamber start by right clicking on ‘Tool Paths’ found under the chamber name
as shown below.
Double click on the Tool Path name that was created as shown below. Enter all of the pertinent
information such as Number of Passes, Tool Number, Additional Oversize Amount, and Initial Feeds and
Speeds.