Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Страница: 79 / 210

Section 5 Operating Instructions P69AHD Manual
www.rottlermfg.com
5-35
Next click on the ‘Auto Cycle Controls’ tab to start your program. Notice that the port number is
highlighted either green or yellow. Having the port lit up in green means that these are the ports that will
be machined. In the example below Port 3 was used to digitize from.
You will want to add a value of zero here. Simply add the bore spacing in ports 1, 2, and 4. In this
example we have a small block Chevy with a bore spacing of 4.4. Ports to the left of port 3 are negative
and ports to the right of 3 are positive.
The diagram below shows the actual tool path the cutter will follow. You will notice that there is a green
arc that moves from the intake part of the port around to the seat side of the port. This represents the
movement of the tool when it completes the first half of the port, then pulls out, then rotates around to the
opposite side of the port to begin its operations where it will join in the middle of the port.