Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Страница: 49 / 210

Section 5 Operating Instructions P69AHD Manual
www.rottlermfg.com
5-5
Locating Fixture
To locate fixture, the pins need to be located individually and set as a location within the program. Starting
with the left side, use a dial indicator to locate the pin, the spindle will be in line with the pin and the
indicator should be zero on the X and Y axis. Under the “Set UP” tab there’s a “Program Options” tab,
then press the green button “Assign Pin Location 1” for the left pin. A window will come up asking if you
are sure you want to set pin location and verifying that the right fixture number is selected. Then move to
locate the pin on the right side, when centered on the pin go back to the “Program Options” and click on
the green button “Assign Pin Location 2”
Pin one on the left will be used as the X and Y zero for the fixture offset location. All probe points as well
as tool path information will be referenced from this pin location.
After both pins are located, the Z axis needs to be changed to 2.0000” since it’s the distance from what
the fixture is rotating on the A axis. Simply go to the “Table of Fixtures” tab and click on the fixture number
that is selected, there will be a window that come up indicating the position for the X, Y, and Z axis, double
click on the Z axis and change it to 2.0000” and the fixture is set.