Rottler P69AHD Скачать руководство пользователя страница 16

Страница: 16 / 210

Section 2 Installation

P69AHD Manual

www.rottlermfg.com

2-5

INSTRUCTING THE OPERATOR:

Note: Rotter employees and representatives per company policy are not permitted to provide end

user of Rottler equipment with any OEM specifications for the workpiece that is created by end

user using Rottler equipment.

______ Explain to the customer and operator that at NO time is there to be any software or hardware

other than Windows Auto Update and Rottler installed on this machine. This includes screen

savers, anti-virus software, and any hardware device that installs software on the machine.

Installation of screen savers and anti-virus software can cause dangerous control problems. Any

installation of software or hardware will void the warranty on the machine.

______Explain to the customer and operator that the machine should be hooked up to the Internet

anytime it is on. The software on the machine will automatically connect to our server to send

back useful information on machine status.

______Connect customer supplied Internet to the machine. Verify that the Internet is accessible from the

machine.

______Once the machine has been fully setup and is ready for operation create a Skype account for the

machine following the instructions in the Installation Section of the manual.

______Explain to the customer and the operator how the to log onto Skype and communicate with Rottler

when needed.

______ Computer Viruses will cause the machine control system to become unstable. This may cause

the machine to make uncontrolled moves which could create a dangerous environment for the

machine operator.

______Refer to Chapter 4, Control Definitions of the Machine Manual, Section: Computer and Controller

System Safety. Explain and discuss this section carefully with Owner/Manager/Operator and have

them sign off. Failure to do so will result in the machine warranty being Null and Void.

______________________________________________________________________

Signature / Title

______Explain to the customer the importance of backing up the block profiles to a separate device. Any

computer failure or possible operator input error can result in the loss of all block profiles that

were created for the machine. Refer to Chapter 5 of the machine manual for detailed instructions

on backing up and restoring block profiles.

______Install and test the Internet connection to the machine. DO NOT download any updates unless

instructed to do so by Rottler.

______Connect customer supplied Internet to the machine.

______Verify that the Internet is accessible from the machine.

______Explain to the customer how to properly turn the machine off when it is not in use. Do not leave

the machine on overnight. It is important to close all programs followed by shutting down

Windows before turning the main power switch off. Do not turn the main power switch off before

shutting down Windows.

______Using the operating manual as a guide explain the function of all buttons.

______Cycle all machine movements and supervise the handling of same by operator.

______Demonstrate the differences of Manual and Auto operation.

______Explain machine parameters and error messages. It is very important that the customer does not

change parameter settings without first checking with Rottler Manufacturing. If certain parameters

are changed the machine may make uncontrolled moves or not operate at all.

______Point out safety features to customer and operator.

Do not push any buttons without thinking

of safety first.

Содержание P69AHD



















































































































































































































Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды

Rottler P69AHD, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание P69AHD

Отзывы:

Похожие инструкции для P69AHD

Бренды по названию

Популярные бренды