manualshive.com logo in svg

Rosemount 890, Инструкция по эксплуатации

Поделиться
Скачать
Rosemount 890 Скачать руководство пользователя страница 74

R

OUTINE 

S

ERVICE

Rosemount Analytical

748460-A

January 2000

6-10

6.4  ELECTRONIC CIRCUITRY

6.4.1

  

P

OWER 

S

UPPLY BOARD

The Power Supply Board provides voltages required by the various circuit boards (+5
V, 

±

15 V, -12 V).  In addition, it provides:  a)  constant current to drive the UV lamp;  b)

 constant voltages for the lamp heater; c)  proportional temperature control for the
case heater; and d)  circuitry for the isolated current output.

6.4.2  S

IGNAL 

B

OARD

The Signal Board provides the processing of the four detector signals and timing for
the pulsed UV lamp, and includes the integrator.  The Signal Board includes:  a)  The
Zero Suppression circuit;  b)  the Span adjustment;  c)  temperature compensation for
Zero and Span;  d) the programmable gain amplifier;  and e)  the 8-channel multiplexer
for processing the different signals.

6.4.3  P

REAMPLIFIER 

B

OARD

There are four identical Preamplifier Boards, one for each detector.  The board
contains the silicon photodiode detector, which converts the UV radiation into a
current, and an amplifier that converts the current into voltage.

6.4.4  A

DAPTER 

B

OARD

The Adapter Board (which includes a circuit breaker) is for line power distribution.  The
Adapter Board also serves as an interface board for all the option boards and provides
the recorder output (TB2).

6.4.5  M

ICRO 

B

OARD

The Micro Board is a self-contained circuit assembly which includes an advanced
microprocessor and multiple I/O functions with a complete analog domain consisting of
analog-to-digital converters and digital-to-analog converters.  Multiple output registers
allow the transmission of digital data to and from the board under program control. 
The board can be used alone or in conjunction with I/O boards that satisfy interfacing
requirements such as the following:

1.  Bi-directional Remote Range I/O Board
2. Dual Alarm
3. Auto Zero/Span
4.  Calibration Gas Control

The board is configured with an analog domain that allows the processing of analog
signals directly with a 12-bit, plus sign ADC.  Also, two independent DACs, each 12-
bits wide, allow the presentation of analog voltages for peripheral functions
immediately.

Содержание 890

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды