manualshive.com logo in svg

Rosemount 890, Инструкция по эксплуатации

Поделиться
Скачать
Rosemount 890 Скачать руководство пользователя страница 14

P

REFACE

Rosemount Analytical

          

January 2000

748460-A

P-6

C

USTOMER 

S

ERVICE

, T

ECHNICAL 

A

SSISTANCE AND 

F

IELD 

S

ERVICE

For order administration, replacement parts, application assistance, on-site or factory
repair, service or maintenance contract information, contact:

Rosemount Analytical Inc.

Process Analytical Division

Customer Service Center

1-800-433-6076

R

ETURNING 

P

ARTS TO THE 

F

ACTORY

Before returning parts, contact the Customer Service Center and request a Returned
Materials Authorization (RMA) number. Please have the following information when
you call:  

Model Number, Serial Number, and Purchase Order Number or Sales Order

Number.

Prior authorization by the factory must be obtained before returned materials will be
accepted.    Unauthorized returns will be returned to the sender, freight collect.

When returning any product or component that has been exposed to a toxic, corrosive
or other hazardous material or used in such a hazardous environment, the user must
attach an appropriate Material Safety Data Sheet (MSDS) or a written certification that
the material has been decontaminated, disinfected and/or detoxified.

Return to:

Rosemount Analytical Inc.

4125 East La Palma Avenue

Anaheim, California 92807-1802

USA

T

RAINING

A comprehensive Factory Training Program of operator and service classes is
available.  For a copy of the 

Current Operator and Service Training Schedule

 

contact

the Technical Services Department at:

Rosemount Analytical Inc.

Phone: 1-714-986-7600

FAX:  1-714-577-8006

D

OCUMENTATION

The following Model 890 Analyzer instruction materials are available.    Contact
Customer Service or the local representative to order.

748460    Instruction Manual (this document)

Содержание 890

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды