manualshive.com logo in svg

Rosemount 890, Инструкция по эксплуатации

Поделиться
Скачать
Rosemount 890 Скачать руководство пользователя страница 33

I

NITIAL 

S

TARTUP AND 

C

ALIBRATION

 

748460-A

3-3

Rosemount Analytical

January 2000

To activate the manual zero calibration of the analyzer.

To activate the manual span calibration of the analyzer.

To display the configuration and the status of alarms and error messages.

Used in conjunction with left and right or up and down arrows, F1, F2 and
ENTER keys. Pressing the SHIFT key in any display except Run Mode, Zero
Setting, Span Setting and Status causes a  

↑

  to be displayed at the far right 

position.  Pressing  

→

  will then move the cursor 16 characters to the right,

pressing  

←

  will move the cursor 16 characters to the left, and, if a displayed

parameter is being modified, pressing   

↑

   will access the highest value

allowed for that parameter and pressing  

↓

  will access the lowest value

allowed for that parameter.

Software programmable keys for quick access to mode functions.  When used
 in  conjunction with the SHIFT key, two additional functions  are  available:  
SHIFT/F1  and  SHIFT/F2.  The  computer acknowledges the keystrokes by
flashing [** KEY SAVED **] on the display. These four functions can
immediately access a particular display for the following modes: Range,
Diagnostics, Linearization, Alarm, Current Output, Auto Zero/Span or Remote
Range I/O.

To display instrument functions. The standard functions are security, range,
diagnostics, current output  and   linearization.  Additional functions, in
conjunction with option boards, are Auto Zero/Span, Remote Range I/O, and
Alarm.

The up and down arrow keys are used to modify the data in the display.  
Depress  either the up or down arrow to change the values displayed. When
used in one of the  editing  modes,  SHIFT  

↑

  causes the highest value

allowed in a function to be displayed. SHIFT  

↓

  causes the lowest value to be

displayed.  Depress the arrow key once to change one digit; depress and hold
either key to scroll (continuous value change), thereby reducing the time
required to make large value changes.

To move cursor one position at a  time  or,  when  used in conjunction  with 
the  SHIFT  key moves the cursor 16 characters, one full display, at a time.

ZERO

SPAN

F1

F2

STATUS

SHIFT

MODE

Содержание 890

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды