Roland ColorCamm PC-12, Руководство пользователя

Страница: 59 / 97

57
Part 5 Many Kinds of Printing and Settings
Direction of
printing
Media size
Printing size
Crop mark
Crop mark
Crop mark
An example of media with crop marks
2
After print ends, laminate the media.
Trim away any lamination extending beyond the base
media.
3
Load the laminated media on the PC-12.
4 At the [Roland PC-12] dialog box, make settings like the
ones below, then carry out printing.
- In the [Output Data] field, choose [Cutting], then select
the [Crop Marks] check box.
The machine detects the crop marks on each page,
automatically performs alignment, then carries out cutting.
Media guide
In order to reload media that has been printed, there must be 30 mm (1-3/16 in.) or more from where printing ends
and the rear edge of the media (the location where the media was cut off).
When you reload the media, keep the edge of the printed media against the media guide and insert the media all the
way until it makes contact, then press the [ready/insert] button once.