Roland ColorCamm PC-12, Руководство пользователя

Страница: 51 / 97

49
Part 4 Steps Up Through Printing and Cutting
About Prefeed
When printing starts, prefeed is performed first. Prefeed ensures that there is enough media left for the job by pulling
out the length of media required for printing. After the media is pulled out, it returns to its original position. Leave
some slack in the roll media at this time, as shown in the figure.
If there is no slack in the roll media, printing or cutting may be misaligned, or the media may come loose of jam.
Leave some slack in the roll
media.
This figure shows the machine with the media cover detached, but you should normally use the machine with the
media cover installed. You can add slackness to the roll media even when the media cover is installed.
Status Monitor
The Status Monitor appears when printing starts. The Status Monitor displays the status of the PC-12 and the
progress of printing. When printing ends, the Status Monitor automatically disappears.
This displays the
status of printing.
This shows the
present progress of
printing within the
page.
To quit printing,
click here.
To pause printing, click here. To
resume printing, click here again.
This quits printing, then performs printing
again. You can optionally select whether to
redo printing from the first page or from the
present page.
To display version
information for the Status
Monitor, click here.
For Windows 95/98/Me
For Windows NT 4.0/2000
To pause printing, click here.
To resume printing, click here
again.
To quit printing,
click here.
This displays the
status of printing.
To display version
information for the Status
Monitor, click here.