Roland ColorCamm PC-12 Скачать руководство пользователя страница 18

Страница: 18 / 97

Part 2 Installing the Driver

2.1 Installation

Part 2 Installing the Driver

Before Installing

The following operating environment is required in order to install and use the driver. Make sure your system configuration meets these

requirements.

Operating system

Microsoft

Windows

95/98/Me, or Windows NT

4.0/2000

* Windows 2000 Service Pack 2 or later

* Windows NT 4.0 Service Pack 6 or later

* Full access rights for printer settings are required to install on Windows NT 4.0 or Windows 2000. Log on

to Windows as a member of group the "Administrator" or "Power Users" group. For more information

about groups, refer to the documentation for Windows.

* USB ports are not supported on Windows 95 or Windows NT 4.0.

Computer hardware

Personal computer running Windows (Pentium processor or higher recommended)

Memory

64 MB or more

Connector cable

Parallel cable (IEEE 1284-compliant) or USB cable

Keep the PC-12 turned off while installing the printer driver.

If power to the PC-12 is on, the computer's Plug and Play feature runs automatically, and the [Add New Hardware

Wizard] screen appears. If this happens, go to the [Add New Hardware Wizard] screen and click [Cancel] to quit the

operation, then follow the steps described below to install the printer driver.

NOTICE

To Install

Turn on the computer and start Windows.

Quit all running programs except Windows. In Windows,

make sure no program icons appear on the taskbar, then go

on to the next step.

In order to output data to the PC-12 from a Windows-based program, you need to install the driver for the PC-12 on the computer you're

using.

Follow the steps below to install the driver.

* The procedure below and all procedures that come after show screens for Windows 98. If your system uses another version of Windows,

some areas shown may be slightly different, but the procedures themselves are the same.

Содержание ColorCamm PC-12


































































































Результаты поиска

Содержание ColorCamm PC-12

Отзывы:

Бренды по названию

Популярные бренды

Roland ColorCamm PC-12, Руководство пользователя

Результаты поиска

Содержание ColorCamm PC-12

Отзывы:

Бренды по названию

Популярные бренды