28
Part 3 Getting Ready
Replacing an Ink Cartridge
When you want to replace one type of ink-ribbon cartridge with another type, or when an ink-ribbon cartridge is used up, follow the steps
below to replace the ink-ribbon cartridge.
- When an ink ribbon is used up and reaches the end, the pattern of silver and black stripes shown in the figure below
becomes visible on the ink ribbon.
Pattern of silver and black stripes
- When an ink cartridge is used up a message appears on the monitor and the [error] light on the PC-12 flashes.
- Remove any used-up ink cartridges.
- If an ink-ribbon cartridge of the same color is installed in a different ink-ribbon cartridge holder, the unit picks up
the cartridge of the same color and continues printing.
However, the [error] light remains flashing until you replace the ink-ribbon cartridge.
2
Place the second ink-ribbon cartridge on top of the first one
that is already installed, and gently press the ink-ribbon
cartridge until the white tab and two gray tabs on the ink-
ribbon cartridge holder engage it.
White tab
Gray tabs (two locations)
To Install a Second Ink-ribbon Cartridge in an Ink-ribbon Cartridge Holder
1
In the same way as for the first ink-ribbon cartridge, arrange
the ink-ribbon cartridge so that side B faces up and grasp
the ink cartridge at the center using your thumb and index
finger.
Содержание ColorCamm PC-12
Страница 96: ...MEMO 94...
Страница 97: ...R1 010808...