Roland ColorCamm PC-12, Руководство пользователя

Страница: 26 / 97

24
Part 3 Getting Ready
Connection Using a USB Cable
The USB cable is sold separately. Use a cable suited to the configuration of the USB port on your computer.
Make the connection to a computer on which the driver is already installed.
Use a USB cable having a length of three meters or less.
3.2 Switching the Power On and Off
1 Press the [power] button on the PC-12. The PC-12
automatically performs initialization, and the [power] and
[ready] lights illuminate.
2 Start the computer.
Follow the steps below to switch the power to the PC-12 and the computer on and off.
Switching On the Power
1 Shut down the computer. 2 Press the [power] button on the PC-12. All the lights go
dark.
Switching Off the Power
When you turn on the PC-12, it performs initialization.
Note that if media is supplies at this time, the media is severed.
Also, the initialization of the media-severing function may produce loud operating noise.
Power Saving
When printing or cutting operations, panel operations, or transmission of data from the computer end, the machine goes into a power-saving
state.
To cancel the power-saving state, send data from the computer or press any key on the operation panel.
NOTICE
Rear left of the machine
USB connector (B type)
computer
USB port
NOTICE