ROJ PCS 200, Оригинальное руководство пользователя

Страница: 31 / 112

Installation
PCS 200 Kit - 2.11 -
2.8.1 Position sensor check
On the display main screen (see paragraph 3.7 - Home), check the tractor with
the seeder icon in the two following conditions:
•
Sensor deactivated: sensor off with yellow LED indicator
and tractor icon showing the machine in seeding position
•
Sensor activated: sensor on with yellow LED indicator and
tractor icon showing the machine in transfer position
2.9 ECU POSITIONING
The ECU housing should be preferably mounted in a sheltered position on the
machine, with the cable output facing downwards.
For a proper fixing of the signal/communication cables on the control unit, use a ¼
”
wrench and tighten the cables on the relative front panel.
Figure 2-11
–
ECU positioning
Both connectors should be plugged to the front panel in order to avoid water
and dust penetration, even if the 30 poles connectors are not used in all
configurations.
In this case your can use the 30 poles ECU plug (P/N ROJ 05R01334) or a
cable already fitted for the seeding test and pressure sensor button (P/N ROJ
05R01380).
Cable output