ROJ PCS 200, Оригинальное руководство пользователя

Страница: 103 / 112

Maintenance and Troubleshooting
PCS 200 Kit - 4.1 -
4
–
MAINTENANCE AND TROUBLESHOOTING
4.1 GENERAL INFORMATION ABOUT MAINTENANCE
Thanks to the inherent sturdiness of the PCS 200 system components, it is not
required to carry out any particular preventive maintenance operations.
However, in order to ensure the maximum equipment reliability and to avoid
hazardous conditions, it is advisable to strictly follow the instructions and warnings
given below.
For safety reasons, all maintenance works on the power train must be carried
out ONLY when the machine is stopped and disconnected from the power
supply, by qualified trained and experienced personnel, having a suitable
experience and knowledge of the PCS 200 system and of the equipment.
Prior to start the maintenance works, thoroughly clean the relevant zone.
Do not use solvents!
After any maintenance task all materials having an impact on the environment
(such as, for example, lubricants, dirty clothes, filter elements, etc.) must be
disposed of properly in accordance with the applicable regulations.
Ensure that unauthorized personnel DO NOT access the working area during
maintenance tasks.
At the end of any task, make sure that no used tools are left inside the equipment or
into the electrical panel.
4.2 ORDINARY PREVENTIVE MAINTENANCE TASKS TO BE
CARRIED OUT BY THE OPERATOR
Operation Frequency Notes
Cleaning Before long periods of inactivity If cleaning with a pressure washer,
do not direct the jet towards
connectors and seals.
Tightness check Every year, after long periods of
inactivity (for ex. at the beginning of
the seeding season)
Geared motors oil change Not necessary