ROJ PCS 200, Оригинальное руководство пользователя

Страница: 17 / 112

General Information
PCS 200 Kit - 1.7 -
1.4 GENERAL SAFETY INFORMATION
1.4.1 Design criteria
The principles introduced by the relevant paragraphs of the following Harmonized
Standards have been adopted in the design and manufacturing of the PCS 200
equipment:
EN ISO 12100: 2010 Safety of machinery. General principles for design.
Risk assessment and risk reduction.
EN ISO13849-1:2015 Safety of machinery. Safety-related parts of control
systems. Part 1: General principles for design.
EN ISO13849-2:2012 Safety of machinery. Safety-related parts of control
systems. Part 2: Validation.
EN ISO 4254-1:2015 Agricultural machinery. Safety. Part 1: General
requirements
EN 14018:2010 Agricultural and forestry machinery. Seeders.
Safety
EN ISO 14982: 2009 Agricultural and forestry machinery -
Electromagnetic compatibility - Test methods and
acceptance criteria
The compliance with the applicable paragraphs of the above listed standards allowed
us to eliminate or reduce risks in the best possible way, during normal operation and
during maintenance and/or adjustment tasks, for the entire life cycle of the machine.
All components have been carefully selected among those available on the market,
and the materials used in manufacturing the system do not pose any risk to people
’
s
health and physical integrity.
In addition to this, warning and safety measures have been implemented on the PCS
200 system, in order to reduce the risks that cannot be completely eliminated
(see
paragraph
“
Warning About Residual Risks
”
).
In particular, the Essential Health and Safety Requirements of Annex I to Directive
2006/42/EC listed in the Incorporation Declaration have been fulfilled. The
compliance with the non-listed requirements must be granted by the system
integrator and will be verified during the commissioning of the PCS 200 system.