ROJ PCS 200, Оригинальное руководство пользователя

Страница: 22 / 112

Installation
- 2.2 - PCS 200 Kit
The application must comply with mentioned torque and speed requirements.
For further information please refer to
TD_1406.601_revD.pdf or subsequent review.
2.3.2 Outlet shaft dimensions
The geared motor outlet has got a hollow shaft with the following dimensions.
Figure 2-1
–
Outlet shaft dimensions
For further information, make reference to the file 1061-cid-a.pdf
2.3.3 Fixing flange features
Please refer to 1061-cid-a.pdf
2.3.4 Mounting angle limits
The gearbox must operate with the axis parallel to the horizontal plane.
In order to grant a suitable lubrication of the reduction phase, it is necessary not to
exceed the maximum tilting indicated below.
Figure 2-2
–
Tilting limits
For further information please make reference to the file 1061-angle.pdf