ROJ PCS 200, Оригинальное руководство пользователя

Страница: 20 / 112

General information
- 1.10 - PCS 200 Kit
At the end of every maintenance work, ensure that none of the used tool has
remained in proximity of the geared motors.
☞
Before restarting the machine, always restore and check the safety devices and
check that they work properly, in case they have been de-activated.
After any operation on the equipment all materials having an impact on the
environment (such as, for example, electrical cables, components, etc.) must
be properly disposed of in accordance with the applicable regulations.
1.4.5 Indications about the noise levels
The PCS 200 system has been designed and manufactured in a way as to minimize
the noise level emitted during its normal operation.
In any case, since the only sources of potential noise generated by the PCS 200
system (
geared motors ) are of negligible magnitude (<70 dBA) relative to the noise
produced by the agricultural machine as a whole, it is the responsibility of the
machine manufacturer and/or the end user to determine the A-weighted sound
pressure level generated by the whole machine.
1.4.6 Proper and improper use
The PCS 200 system has been designed to be incorporated into seeders.
The use of the PCS 200 for different purposes may result in damage to persons or
the equipment itself and is therefore considered as an
Improper Use for which the
Manufacturer will not be held responsible.
1.4.7 Reliability of the safety-related control systems
In this equipment the safety-related control systems have been designed in
accordance with the principles of harmonized standard EN ISO 13849-
1:2008/AC:2009. The following table shows the Category and implemented
Performance Level (PL) values
(as compared to the Required Performance Level
(PLr) resulting from the risk assessment) .
The PL has been calculated using the "SISTEMA" (IFA) software.
Safety function Category PL PLr
Inhibition of dangerous movements in case of
metering unit guard open 1 c c
The calculation of the PL values and the
“
SISTEMA
”
relevant report can be found
in the Technical Documentation kept by the manufacturer.