RP248CN User’s and Installer’s Manual Page
5
Check the system.
Display and delete memory.
Display
troubles.
Setting the system clock time and date.
Setting auto arm time and auto disarm time.
Function of the Users code:
Arm or disarm the system.
Bypass
zone(s).
Access one or more zones.
Check the system.
Setting the Users Codes
Through the LCD keypad to set codes, according to the following steps:
1. Depress [*][5] into access function Mode, then depress [*] to find the menu ” ACCESS
CODE ” by [
←
][
→
], depress [#] to confirm and into the menu.
2. Key in the master code (default: 1234 ), then depress [#] to confirm.
3. To choice a menu by [
←
][
→
].
a)
Changing the master codes when display “00 1234 GRANG”.
b)
Changing the User No.1 code when display “01 0 USER”.
c) …
4. Key in a new code and confirm by depress [#]. Finish the change when LCD display
“ACCEPTED”
5. Depress [*] to back to anterior menu Back t o the menu or
6. Depress [*] twice, the system will return to the normal state. Then the power LED is on,
LCD display partition, clock, date, etc..
Modifying/Setting the master Code
Modifying/Setting User’s Codes
Deleting User’s Codes
At times, it may be desirable to completely delete a user code. Note that it is impossible to
delete the master code (although it can be changed).
3.6 Set date and time
Set date: [*]+[6]+[2]+[MASTER CODE]+[MM][DD][YY]
step Operation
1
In disarm state, depress[*][5] to entry into function state
2
Input 4 digit master code then depress [#] to confirm, such as
[1][2][3][4][#]
3
Input new 4 digit code then depress [#] to confirm, such as
[5][6][7][8][#]
4
If successful, the keypad will emit a confirming tone “Beep
－
”.
The selected User Code is now in effect.
5
Exit by depress [*][*]
6
If operate incorrectly, depress [*] to back to the step 2
Step Operation
1
In disarm state, depress [*][5] to entry into function state
2
Entry Master Code: such as [5][6][7][8]
3
Modify/set user 1 code, depress[0] [1] or
Modify/set user 2 code, depress[0] [2] or
…
The other user codes can be modify/set in the same way.
4
Entry the new user code:
For example, [3][3][5][5]
5
If successful, the keypad will emit a confirming tone “Beep
－
”.
Step Operation
1
In disarm state, depress [*][5] to entry into user function state
2
Entry the master code: [5 ][ 6][7 ][8 ]
3
To delete the user code 1, depress
[1]
To delete the user code 2, depress
[2]
To delete the user code 3, depress
[3]
…
The other user s can be deleted in the same way.
4
Entry the
[
0
]
[#] to
delete this User Code
5
If successful, the keypad will emit a short confirming beep.
