RP248CN User’s and Installer’s Manual Page
2
CHAPTER 2 – ABOUT THE KEYPAD
RP248KCL (LCD Keypad)
The control panel RP248CN supports LCD Keypad. Each main board can work with 16 LCD
Keypads at most.
The keypads display system status by its LED indicators and LCD display. Through its keys,
can arm and disarm the system, bypass intrusion zones, report emergencies, stop the siren,
stop calling follow-me number, checking the trouble, program the system etc.
Fig.1 Layout of the RP248KCL
Keys Instruction
1
－
Power LED
2
－
LCD Display
3
－
Arm LED
4
－
Disarm LED
5
－
Bypass LED
6
－
Fire LED
7- Tamper LED
8
－
Digit and Function key-press
9
－
Arm key-press
10
－
Buzzer
11
－
Stay Arm key-press
Keys and LED indicators
The Keys functions:
1. For Arming, Disarming, Panic Alarm, Programming system etc.
2. Entry user’s function mode.
3. Key
[ARM]
is for quick arming and code arming. When arm by
[ARM]
, the system will
be fully armed.
4. Key
[STAY]
is for quick stay arming and code stay arming. Any zone or zones can be
set as interior zone(s) or external zone(s). When arming by
[STAY]
, the external zone(s)
will be armed while leaves the interior zone(s) disarmed.
5. Under the disarmed status, depress [*] to entry user’s function mode for setting code,
clock, on/off the buzzer and so on. For detail, go to CHAPTER 1- SUMMARY of
USER’S COMMANDS
1. Power LED
On--the system AC power supply is in normal and the stand-by battery is in good
condition.
Off—no AC power supply and stand-by battery is in power lack.
Fast flicker—system in trouble.
Slow flicker—system is in users function.
2. LCD Display
The LCD Display on RP248KCL indicates the system status, including zones triggered,
armed/disarmed system, system trouble, time and other programmed information.
Normally the LCD Display indicates partition No., clock, date and weekday as following:
PARTITION 1
10.18 JAN 10 THU
3. ARM LED
On-- system is armed.
Off-- system is disarmed or under the programming state.
Flicker-- The system is under the delay period state.
