Roiscok RP248CN, Руководство пользователя и инсталлятора

Страница: 26 / 37

RP248CN Users and Installer’s Manual Page 25
type is unused
[9][3]
Add/Copy
Partition
Add a new partition or
copy the partition’s data to
a new one
[9][4] Delete Partition
Delete a partition, restore
the partition to default
[9][5]
WL ZONE
ALLOC
It is allowed to… ; please
refer to the user guide of
each transmitter
If it shows as following,
ZONE MAINTENANCE
5) WL ZONE ALLOC
press [ENTER]
[9][5]
XX+ENTER
Use [STAT] and [BYP] to
move cursor and select
zone number,
Note: Zone 1 to Zone 8 are
reserved for the wired
zones
ZONE ALLOCAT:
ZONE#=09 (1:01)
Press [ENTER]
If the following is displayed
on screen,
ZONE=09 (ALLOC):1)
SKIP
Then press [ENTER] to skip
it and come to the allocation
of next transmitter
Write in the information or
cover the old information at
the selected position,
ZONE=09 (ALLOC): 2)
(RE) WRITE
then press [ENTER]
Delete the information at the
selected position,
ZONE= 09 (ALLOC):
3) ERASE
then press [ENTER]
Press [STAY] and [ENTER]
to confirm your selection.
ERASE LOCATION
ARE YOU SURE? N
YES: monitor,
NO:
un-monitor
ZONE=09 (ALLOC):
4) SUPERVISION
Choose YES/NO, then
press [ENTER]
[9][6]
WL COMM
TEST
Wireless
Communication
Test, ex:
ZONE09
： 000%
＞
0.37%
，
the
referring date is
＞
12%
It is allowed to have
communication test between
transmitter and receiver
ZONE MAINTENANCE
06) WL COMM TEST
Press [ENTER] to begin
testing
A wireless zone will be displayed,
then start the transmitter in this
zone, several seconds later, and
the receiver will receive the signal
of the communication, and it will
be displayed in percentage.
If necessary, use [STAT] or
[BYP] to choose the testing
zone number of the next
wireless transmitter.
[9][7]
SELFTEST
ZONES
 This is auto-self-checking
function. Choose a partial
intrusion sensor (ex:
Broken Glass Detector,
Voice Tone Recognizer,
Shock Sensor and so on),
and it can detect those
which are supposed to be
noises or shocks.
 Zone Auto-Self-Checking
function is very helpful,
especially when the
sensor is to be installed at
very important places.
 Set a standard for this
kind of checking, at most
16 zones detector groups
are availed.
 Be sure that the noises or
the shocks should be from
equipment that can be put
at the right place nearing
the sensor; then once the
noises source is started,
ZONE ALLOCAT:
ZONE#=09 (1:01)