RP248CN Users and Installer’s Manual
Page 14
CHAPTER 5 - FUNCTION AND TECHNICAL DATA
You can communicate your RP248CN (8-72 zones control panel) through LCD Keypads
(RP248KCL). Each RP248CN can match with 16 LCD keypads at most. With the LCD
Keypad(s), you can operate your system by arm/disarm, bypass, emergency, closing the
siren, inspecting trouble, programming the system and so on. The system status can be
displayed by the LCD or/and indicator light.
All of your system’s detectors are wired to the control panel. As such, your system always
knows the status of any protected door, window, hallway, room, or area.
RP248CN
5.1 Features of RP248KCL
LCD can display the functions of system
3 Keypad Emergency Zones: Panic[1]+[2], Fire[4]+[5], Medical[7]+[8]
Key-depress
with
Audible
Feedback
LCD and key with backlight
System
status
display
LED Indication: Alarm, Power, Armed, Bypass, Ready, Tamper
Tamper is supervised
Disarm by code and disarm by remote controller
Disarm by duress code
LCD display bypassing and not-ready zones
Quick
arm
Quick arm by code
Quick stay arm
Stay arm by code
Bypass zone quickly
Bypass zone by code
5.2 Features of RP248MB and Expansion Modules
Zones
8 programmable zones on the Main Board, and it can be expanded into 72 zones at most
Special zones: Zone 5 - Fire Zone (default)
Zone 6 -tamper Zone (default)
18 types of Programmable Zones, 5 types of Voice Formats
Zone Terminal: NC, NO, dual and single end with resistor 2.2K
Ω
End calling function
Disarm/arm report can be set
Expansion Modules
There are four expansion modules can match with RP248CN: 8 Zones Expansion Module
(RP248EZ8), 8 Zones Wireless Expansion Module (RP248EW8), 16 Zones Expansion
Module (RP248EZ16) and 16 Zones Wireless Expansion Module (RP248EW16).
