RP248CN Users and Installer’s Manual
Page 29
[4][0][0] Master
Code
Response master code
[4][X][x]
User Code
User code
：
01-30
User code trigger
6.5.5 Code Maintenance
Hot Key
Code
Maintenance
Default Instruction
[1] Administer
For appoint 98 user codes
grades: basic user, one-time
codes
[2]
PARTITION
Appoint code to its partition
[3]
GRAND CODE
1234
Master code is the highest grade
[4] INSTALLER
0248
Master installer code is used for
modification to all data
[5] SUB
INSTALLER
0299
Deputy installation code can be
amended only specific
parameters*
[6] CODE
LENGTH
Setup code digit, 4 digit or 6 digit
[6][1] 4
Digit
Yes
[6][2] 6
Digit
Set deputy installer code programming competence:
1. Return to the normal state;
2. Depress [*] [7] [3] to enter "CUSTOMIZE" mode;
3. Input master Installer code, depress [#];
4. Choose the item, depress [#];
5. Use key [
→
][
←
] to select the item should be restricted. Depress [
←
] button, if this data
turn to "X", the item has been restricted and could not be change by deputy installer code.
Depress [
←
] again turn "X" to a data. Restrictions are cancelled;
6. If there are three brief beeps when depress [
←
], there will be some sub-data. Depress
[#] to entry the sub menu. Depress [
→
][
←
] and [#] to choose the item and depress [
←
] to
restrict.
7. Depress [*] return to the "CUSTOMIZE" state, Depress [STAY] turn N to Y and confirm
with [#] when LCD displays:
I. DO YOU WANT
Ii. TO EXIT? N
8. Depress [STAY] turn N to Y, and depress [#] to save when LCD displays:
DO YOU WANT
TO SAVE MENU? Y
9. Depress [*] twice return to the normal state;
10. Program system through deputy installer code:
In normal state, depress [*] [7] [2] and deputy installer code. All items without restricted
can be set when the LCD will display as following:
SUB-INST. CODE:
6.5.6 Dialer
Depress [#] to set communication format with centre station, phone number of remote
controller station and dialer parameters, etc according to below table.
INSTALLER PROG
5) DILALER
→
Hot Key
Dial
Defau
lt
Instruction
[1] Phone
Number
Set phone number of center
station and remote controller
station
[1][1]
Monitor Station
Phone Number 1
The first center station phone
number
[1][2]
Monitor Station
Phone Number 2
The second center station phone
number
[1][3]
Monitor Station
Phone Number 3
The third center station phone
number
[1][4]
Remote Control
Station Phone
Number
Remote controller station phone
number
[2] User
Accounts
Set user number use for
reporting to center stations
[2][X]
Division Number
Number
Input 1-8 to set up partition
number
[3]
Communication
Format
Set communication format with
center station
[3][1]
Monitoring Station
1
0000
communication format to center
station 1 (4code)
[3][2]
Monitoring Station
2
0000
Communication format to center
station 2 (4 code)
[3][3]
Monitoring Station
3
0000
Communication format to center
station 3 (4 code)
[4]
Access and Identify
Code
Remote control computer
communication
