Rohde ST 630, Руководство по эксплуатации

Страница: 66 / 344

64 / 341 - EN -
Visualisation of the example:
Firing program sequence:
•
The temperature rises at the entered, ascending ramp (heating up) [ramp rate] until the kiln reaches the soak or
target temperature.
•
It then soaks (dwells) at the soak temperature for the soak period.
•
It then runs the next segment until the end of the program is reached.
• It is possible to control ascending ramps (heating up) & descending ramps (cooling down).
• Ascending ramps (heating up) and descending ramps (cooling down) are referred to as the "ramp rate".
•
The ramp rate is set in values between 1 and 999°C/h or as “FULL” (full load heating) or “END” (end of the
program).
•
The soak/target temperature is settable over the range 0 to 1320°C (2408°F).
• The soak period is settable over the range 00:00 (no soak) to 99 hours 59 mins.
Note:
During soaking, the kiln temperature and the remaining soak time appear on the display at intervals of 15 seconds.
User information:
For simple firing such as biscuit firing, two segments are sufficient, more complex firings such as crystal glazes or glass
production require several segments.
Firing program (firing curve)
P
ro
g
ra
m
s
ta
rt
P
ro
g
ra
m
en
d