Rohde ST 630, Руководство по эксплуатации

Страница: 70 / 344

68 / 341 - EN -
Changing a cooling ramp to a heating ramp:
Display Meaning Description Remark
Pr. 1
Program
number
Select the firing program that is to
be changed.
See Section 6.5.1.
Indicator in the
segment display
Select the segment with the cooling
ramp to be changed into a heating
ramp. See Section 6.5.1.
150°C/HR
Cooling ramp
Press the
g
key to switch to the
soak or target temperature.
A cooling ramp is now set in the
selected segment.
599°C
Soak/Target
temperature
This can be altered with the
d
and
f
keys.
The temperature in the selected
segment is lower than in the
previous segment.
⇒
Soak/target temperature in the
previous segment (2) = 600°C
601°C
Soak/Target
temperature
The
d
key increases the value, and
the
h
key makes the display return
to the ramp rate.
Return to the ramp rate in the
selected segment.
150°C/HR
Heating ramp
A heating ramp is now set in the
selected segment.
From here on, the segment can be
fully programmed as a heating
ramp.
The keys
h
or
g
can also be
held down for faster input.
6.5.4. Programming the “FULL” ramp rate
An unregulated full load heating/cooling ramp (“FULL”) can be programmed.
Display Meaning Description Remark
Pr. 1
Program
number
Select the firing program that is to be
changed.
See Section 6.5.1.
Indicator in
the segment
display
Select the segment with the heating
ramp to be changed into a cooling
ramp. See Section 6.5.1.
150°C/HR
Heating ramp
Cooling ramp
The ramp rate for the heating or
cooling ramp is shown in the main
display.
Possible main display:
„0,1 °C/h-9,9 °C/h“,
„10 °C/h-999 °C/h“
FULL
Heating ramp
Cooling ramp
Press or hold down the
d
key until
“FULL” appears in the main display.
• “FULL” heats or cools as fast as
possible.
• The “END” value is one step
above the ramp rate “999°C/h”.
The keys
h
or
g
can also be
held down for faster input.