manualshive.com logo in svg

Rohde & Schwarz FSQ series, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz FSQ series Скачать руководство пользователя страница 62

R&S FSQ

Preparing for Use

Connecting External Devices

2.12

Quick Start Guide 1313.9652.62 - 02

7. Select 

Add

 and choose one of the available languages. 

Confirm your selection with OK.

8. Change the Default input language as you like in the 

Default Input Language

 pane and 

close all open dialogs with OK.

9. Reboot the R&S FSQ

2.3.2 Connecting a Mouse

To simplify Windows XP operation, the R&S FSQ allows you to connect a mouse to one of the
USB interfaces on the front or rear panel or the PS/2 mouse connector on the rear panel.

Mouse devices from Microsoft and Logitech are supported.

After being connected, the mouse is automatically detected. Special settings such as mouse
cursor speed, etc. can be made in the Windows XP Start menu by selecting 

START

  -

SETTINGS

 - 

CONTROL PANEL

 -

 MOUSE

.

If you use a keyboard that contains a trackball for mouse operations,
connecting an external mouse in addition may lead to malfunctions.

USB

Содержание FSQ series






































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды