manualshive.com logo in svg

Rohde & Schwarz FSQ series, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz FSQ series Скачать руководство пользователя страница 176

R&S FSQ

LAN Interface

Manual Operation of the R&S FSQ with XP Remote Desktop

6.28

Quick Start Guide 1313.9652.62 - 02

6.7.3 Configuring the Controller

Before Remote Desktop can be operated, the TCP/IP protocol must be created on the
controller and Remote Desktop Client must be installed.

The settings on the Remote Desktop Client of the controller must be made before the
connection with the R&S FSQ is set up. The procedure is as follows:

➢

Press the Windows key or 

CTRL

+

ESC

.

➢

Select 

Programs

 - 

Accessories

 - Communications - Remote Desktop Connection.

The Remote Desktop login screen will appear.

➢

Select the 

Options >> 

button.

The table with the configuration data will appear.

➢

Select the 

Experience

 tab. 

These settings are used to select and optimize the connection speed.

With Windows XP, Remote Desktop Client is part of the operating
system and can be accessed via 

Start

 - 

Programs

 - 

Accessories

  -

Communications

  - 

Remote Desktop Connection

.

For other versions of Windows, Microsoft offers the Remote Desktop
Client as an add-on.

Содержание FSQ series






































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды