manualshive.com logo in svg

Rohde & Schwarz FSQ series, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz FSQ series Скачать руководство пользователя страница 104

R&S FSQ

Basic Operation

Diagram Layout

4.6

Quick Start Guide 1313.9652.62 - 02

Enhancement labels:

The enhancement labels on the right-hand side of the measurement diagram indicate that the
user chose instrument settings that affect the measurement results even though this is not
immediately apparent from the display of the measured values.

*

 (star)

The current instrument setting does not match the one during which the displayed
traces were recorded. This occurs in the following cases:
– The instrument setting is changed while a measurement is in progress.
– The instrument setting is changed in the SINGLE SWEEP mode after the end 

of the sweep, and a new sweep is not started.

– The instrument setting is changed after a trace has been set to VIEW.
The display remains on screen until the user eliminates the cause. In some
cases, this involves starting a new sweep (SINGLE SWEEP mode) or switching
the affected trace to BLANK.

A/B

 

Designation for screen A/B. If screen A/B is activated for entering measurement
parameters, the label background will be in color.

SGL

 

The sweep is set to SINGLE SWEEP.

GAT

 

The frequency sweep is controlled via the EXT TRIG/GATE connector.

TRG

 Instrument 

triggering 

is not free running (

≠

 FREE RUN).

LVL

 

A level offset 

≠

 0 dB is set.

FRQ

 A 

frequency 

offset 

≠

 0 Hz is set.

TDF

 

A TRANSDUCER FACTOR is activated.

PRN

 

Printer output is active.

75 

Ω

 

The input impedance of the instrument is set to 75 

Ω

.

EXT

 

The instrument is configured for operation with an external reference. 

PA

 

The RF PREAMPLIFIER is switched on (option R&S FSU-B24 or R&S FSU-
B25).

PS

The PRESELECTOR is switched on.

3DB

Gauss Filter (3 dB)

6DB

EMI Filter (6 dB)

FFT

FFT Filter

CHN

Channel Filter

RRC

RRC Filter

Содержание FSQ series






































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды