manualshive.com logo in svg

Rohde & Schwarz FSQ series, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz FSQ series Скачать руководство пользователя страница 212

R&S FSQ

Appendix

Installing USB Printers

A.2

Quick Start Guide 1313.9652.62 - 02

A.1 Installing USB Printers

➢

If you use a USB device for driver installation, install the USB device on the instrument and 
connect it to the instrument before starting the installation.

➢

If you use a LAN connection for driver installation, the corresponding network drives must 
be mounted before starting the installation.

➢

Connect the printer via the USB connector on the front panel to the R&S FSQ. The first 
page of the 

Found New Hardware Wizard

 dialog box is displayed.

➢

Select the 

No, not this time

 option to skip the Windows update via internet. 

You can also perform a Windows update by selecting one of the other options. However, 
note that the R&S FSQ 
– has limited disk space, so make sure that there’s enough disk space available or save 

the update on an external medium, e.g. a USB stick.

– has to be connected to the internet to perform an update.

➢

Click 

Next

 to get to the second 

Found New Hardware Wizard

 dialog box.

Содержание FSQ series






































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды