manualshive.com logo in svg

Rohde & Schwarz FSQ series, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz FSQ series Скачать руководство пользователя страница 136

R&S FSQ

Basic Measurement Examples

Measurements in the Time Domain

5.26

Quick Start Guide 1313.9652.62 - 02

5. By using the video trigger, elicit triggering on the rising edge of the burst and shift 

the start of burst to the center of the screen.

➢

Press the 

TRIG

 key.

➢

Press the 

VIDEO

 softkey and enter

 70%

.

The R&S FSQ shows a static image with the GSM burst at the start of the trace.

➢

Press the 

TRIGGER OFFSET

 softkey and enter 

-1 ms

.

The R&S FSQ shows the GSM burst in the right-hand half of the measurement diagram.

6. Configure the power measurement in the time domain.

➢

Press the MEAS key.

➢

Press the 

TIME DOM POWER 

softkey.

➢

Set the 

LIMITS

 softkey to 

ON

.

➢

Press the 

START LIMIT

 softkey.

➢

Using the rotary knob, move the vertical line to the start of the burst.

➢

Press the 

STOP LIMIT

 softkey.

➢

Using the rotary knob, move the second vertical line to the end of the burst.
The R&S FSQ outputs on screen the power during the activation phase of the burst.

Fig. 5-14 Power measurement during the activation phase of the burst

Содержание FSQ series






































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды