Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 131 / 418

Numeric Measurement Modes
R&S
®
EVSG1000
131 User Manual 1178.6227.02 ─ 06
Dot Length ...................................................................................................................131
Dash Length ................................................................................................................131
Dot-Dash Gap ............................................................................................................. 131
Letter Gap ................................................................................................................... 131
ID AM .......................................................................................................................... 132
ID Freq ........................................................................................................................ 132
Last ID
Time since last ID pulse was measured
Remote command:
LASTID_TIME
on page 302
Carr Lev Change
Variance in power level during ID transmission.
Remote command:
NDB_CARLEV_CHANGE
on page 348
ID Code
Morse-decoded ID with three or four letters.
Remote command:
ID_CODE
on page 349
ID Period
Time between two measured ID pulses
Remote command:
ID_PERIOD
on page 302
Dot Length
Length of time a dot is transmitted in the used Morse code in milliseconds.
Remote command:
ID_DOT_LENGTH
on page 301
Dash Length
Length of time a dash is transmitted in the used Morse cod in milliseconds.
Remote command:
ID_DASH_LENGTH
on page 301
Dot-Dash Gap
Length of time that passes between a transmitted dot and a dash in the used Morse
code in milliseconds.
Remote command:
ID_DOTDASH_GAP
on page 301
Letter Gap
Length of time that passes between two transmitted letters in the used Morse code in
milliseconds.
Non-Directional Beacon Mode (Option R&S EVSG1-K7)