GBAS/SCAT-I Mode (Options R&S
EVSG-K4/-K5)
R&S
®
EVSG1000
183
User Manual 1178.6227.02 ─ 06
The "Burst" view is similar to the "Frame" view. However, the "Burst" view displays the
results for an individual slot.
Figure 6-4: Example for a "Burst" view with a diagram and result table
By default, the first slot (A) from the most recently measured frame T is selected. To
display the results for a different slot, use the
functions.
The display is updated each time a complete slot has been measured, that is: every
62.5
ms. To freeze the current display for evaluation, you can pause the view update
on page 190). Data recording and streaming, however, continue as
usual. When updating is resumed, the displayed results in the view are updated.
The "Burst" view contains two different displays:
●
Chapter 6.3.3.1, "Slot Power vs. Time Diagram"
●
Chapter 6.3.3.2, "Slot Results Table"
................................................................................183
6.3.3.1
Slot Power vs. Time Diagram
A power vs. time diagram displays the measured power in the slot per time, normalized
to the PPS signal. The x-axis shows the time in milliseconds. It always starts at 0
sec-
onds or a multiple of 62.5
milliseconds. The default range is 62.5
milliseconds. If a
TDMA timing error occurs, the GBAS/SCAT burst can exceed the displayed time
range.
GBAS / SCAT-I Measurement Views and Results
