Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 58 / 418

Numeric Measurement Modes
R&S
®
EVSG1000
58 User Manual 1178.6227.02 ─ 06
Switching from numeric to graphical results
You can display graphical results directly from the ILS Localizer or Glidepath mode by
selecting the softkey in the "Meas" menu. In this case, the settings for the current mea-
surement are applied to the graphical results.
The graphical results are only availabe for a single carrier. Thus, when you switch to a
graphical measurement mode from an ILS mode, you must select the carrier for which
you want to see the graphical results. When you select the softkey, a submenu is dis-
played to select the carrier.
To return from the graphical results to the ILS Localizer or Glidepath mode, select
"Return" ([F7]).
For details on the graphical results, see:
●
Chapter 5.1, "RF Spectrum Mode (Option R&S EVSG-K10)" , on page 139
●
Chapter 5.2, "IF Spectrum Mode (Option R&S EVSG-K10)" , on page 144
●
Chapter 5.3, "AF Spectrum Mode (Option R&S EVSG-K11)" , on page 149
●
Chapter 5.4, "AF Time Domain Mode (Option R&S EVSG-K12)" , on page 158
Figure 4-2: ILS Localizer mode main results view
ILS Localizer and ILS Glidepath (GP) Modes