Roger PR311SE Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 43

background image

Functional description of PRxx1 series controllers Rev.H.doc

2016-10-28

35/43

[17#] <AUTH> (SK) [NNN][P] - Deactivate User Option [P] for the user with ID=NNN

See command [16] above.

[18#] <AUTH> (SK) [P] - Deactivate User Option [P] for all users

See command [16] above.

[20#] <AUTH> (SK) [20] - Delete all Guest users

The command erases all cards and PINS for all Guest users (see 2.3.1 Standard and Guest Users).

[21#] <AUTH> (SK) [G] <Card> - Program the card for the Guest user with ID=[G]

[G] parameter must be in range 0-7 as it corresponds to Guest ID in range of 4000 – 4007 (see
2.3.1 Standard and Guest Users).

[22#] <AUTH> (SK) [G]<PIN> - Program the PIN for Guest user with ID=[G]

[G] parameter must be in range 0-7 as it corresponds to Guest ID in range of 4000 – 4007 (see
2.3.1 Standard and Guest Users).

[23#] <AUTH> (SK) [G] - Delete Guest user with ID=[G]

[G] parameter must be in range 0-7 as it corresponds to Guest ID in range of 4000 – 4007 (see
2.3.1 Standard and Guest Users).

[31#] <AUTH> (SK) [F] - Define AUX1 flag

Enter: [F] = [0] to clear the flag, [F] = [1] to set the flag or [F] = [2] to toggle the flag to opposite

state (see 2.7.9 System Flags)

[32#] <AUTH> (SK) [F] - Define AUX2 flag

Enter: [F] = [0] to clear the flag, [F] = [1] to set the flag or [F] = [2] to toggle the flag to opposite

state (see 2.7.9 System Flags).

[33#] <AUTH> (SK) [F] - Define LIGHT flag

Enter: [F] = [0] to clear the flag, [F] = [1] to set the flag or [F] = [2] to toggle the flag to opposite

state (see 2.7.9 System Flags).

[34#] <AUTH> (SK) [T] - Define Door Mode

Following values of [T] parameter are available (see also 2.5 Door Modes):

[T] = [0] Normal Door Mode
[T] = [1] Unlocked Door Mode
[T] = [2] Cond. Unlocked Door Mode

[T] = [3] Locked Door Mode

[35#] <AUTH> (SK) [A] - Define Identification Mode

Enter: [A] = [0] to set Card or PIN, [A] = [1] to set Card Only, [A] = [2] to set PIN Only, [A] = [3]

to set Card and PIN. See also 2.4 Identification Modes.

Note: After setting PIN Only Identification Mode, MASTER card cannot be used. Similarly after
setting Card Only Identification Mode, MASTER PIN cannot be used.

[39#] <AUTH>

-

Set INTRUDER flag

The command is used for activation of

INTRUDER

flag (see 2.7.9 System Flags).

3.3 Installer Programming Mode

The mode enables detailed configuration of the controller in order to adapt it to specific
requirements at site. This is the manual programming (keypad), opposite to remote programming

by means of PR Master software. Installer Programming can be started both in Armed and
Disarmed Modes (see 2.6 Armed and Disarmed Modes) by means of following command:

«
...
33
34
35
36
37
...
»

Содержание PR311SE












































Отзывы:

Нет отзывов

Похожие инструкции для PR311SE

Univerge SV8100

Бренд: NEC Страницы: 3

ETP-MT/R OP SOLAR

Бренд: Talk-a-Phone Страницы: 5

Бренд: Banner Страницы: 15

Бренд: bar Страницы: 2

Бренд: Campbell Страницы: 72

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: Parker Страницы: 28

Digiplex DGP-848

Бренд: Paradox Страницы: 20

Бренд: ValvTechnologies Страницы: 20

U1000 iQpump Drive

Бренд: YASKAWA Страницы: 26

Z1000 CIMR-ZU*A Series

Бренд: YASKAWA Страницы: 2

Бренд: YASKAWA SIEMENS Страницы: 373

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды