Roche MagNA Pure Compact Instrument, Руководство оператора

Страница: 17 / 130

3
Important Information regarding the MagNA Pure Compact Instrument Operator’s Manual
Symbols used in the Manual, page 8
Current Version
Symbol Heading Description
WARNING
RISK OF DANGER This symbol is used to indicate that noncompliance with instructions or
procedures may lead to physical injury or even death or could cause
damage to the instrument.
HOT SURFACE This symbol is used to label potentially hot instrument surfaces.
BIOHAZARD This symbol is used to indicate that certain precautions must be taken
when working with potentially infectious material.
IMPORTANT NOTE This symbol is used to bring your attention to an important annotation.
INFORMATION NOTE Designates a note that provides additional information concerning the
current topic or procedure.
Additional Information:
Symbol Heading Description
WEE Electrical and electronic equipment marked with this symbol are covered
by the European directive WEEE.
The symbol denotes that the equipment must not be disposed off in the
municipal waste system.
General Information, page 11
Current Version Additional Information
Electrical
Safety General Information:
Protection Class I The MagNA Pure Compact Instrument is designed in accordance
with Protection Class I (IEC). The chassis/housing of the Instru-
ment is connected to protection earth (PE) by means of a cable. For
protection against electrical shock hazards, the Instrument must be
directly connected to an approved power source, such as a three-wire
grounded receptacle for the 230V line. Where an ungrounded receptacle
is encountered, a qualifi ed electrician must replace it with a properly
(PE) grounded receptacle, in accordance with the local electrical code.
An extension must not be used. Any break in the electrical ground path,
whether inside or outside the Instrument, could create a hazardous
condition. Under no circumstances should the user attempt to modify
or deliberately defeat the safety features of this Instrument. If the power
cord becomes cracked, frayed, broken, or otherwise damaged, it must be
replaced immediately with the equivalent part from Roche Diagnostics.
All peripheral devices that are connected to the MagNA Pure Compact
Instrument must comply with safety standard IEC 60950 for information
technology equipment, or with IEC 61010-1, UL 61010-1 for laboratory
instruments.
MagNA Pure Compact Instrument Operator’s Manual - 2
nd
Addendum
27270610 MagNA Pure Compact OP 1.3 - 2nd Addendum-4S.indd 3 27270610 MagNA Pure Compact OP 1.3 - 2nd Addendum-4S.indd 3 17.06.2010 13:50:33 17.06.2010 13:50:33