Roberts Gorden Combat HF 30 v4, Инструкция по установке, пусконаладке, обслуживанию и эксплуатации

Страница: 72 / 76

Page 70
CABINET HEATER
It is recommended that a service is carried out at least once per year to ensure continued safe and efficient operation
except that in dirty or dusty environments more frequent servicing may be necessary.
Note: Gas fired heaters may only be serviced by a C.O.R.G.I. registered engineer.
For further Service details, please contact the Roberts-Gordon Service Department on 01902 498733.
10.5.1 Care Of Heater
It is important for the safe operation of the heater that rubbish or other materials are not allowed to accumulate around
the air intake grilles of the heater. A clear area of at least 0.6 metres at the sides and rear of the heater and 2 metres at
the front of the heater should be maintained at all times and the air intake grilles must not be covered or blocked by
debris.
IMPORTANT
For maintenance of the heater all of the upper panels need to be removed for the checking and replacement of
insulation. Also the lower side panels are the only access for removal of the main fan, it is therefore necessary to have
a minimum clear area of at least 1 m to one of the sides for this purpose.
There should be a clear distance of at least 4 m from the discharge heads to ensure free flow of warm air.
The heater casing may be cleaned by wiping with a cloth dampened with soapy water. Do not use abrasive materials
or excessive water.
WARNING
IF AT ANY TIME A GAS LEAK IS SUSPECTED TURN OFF THE GAS SUPPLY.
DO NOT use a naked light.
DO NOT operate electrical switches or controls.
Contact your local Gas supply undertaking immediately.