DigitalSpot 3000 DT
7
Rear panel of the fixture base
4.1 Placing fixture head covers
The head cooling fans are fixed in head covers and their supply is realized by a pair of springy contacts.
The head covers cannot be interchanged otherwise the fans will not work.
Pay attention to correct placing the covers on the fixture head.
The top head cover (1) does not has air vents at its front and shelters the top projector side with the lamp cover
(3).
The bottom head cover (2) has air vents at its front and shelters bottom projector side.
5. Video inputs
Both
Composite
(8) and
S-Video
(9) inputs provide direct connection to the projector. The inputs are intended for a
static presentation as data going through the inputs cannot be processed in a graphics engine ,it means that
graphics effects from a DMX protocol will not be usable. In this use of the fixture, the function of Keystoning from a
DMX protocol will not operate. Next both inputs
Composite
(10) and
S-Video
(11) enable to process data in a
graphics engine, it is means that you can use all spectrum of effects that the DMX protocol offers
1
- Power cord
2
- Power switch
3
- Fuse
4
- LAN (RJ-45) port
5
- DMX input/output (5-pin XLR)
6
- ATX switch
7
- 2 x USB port
8
- Composite input-
dataprojector
9
- S-video input-dataprojector
10
- Composite input-
dataprojector
11
- S-video input- graphics engine
12
- DMX input/output (3-pin XLR)
Содержание DigitalSpot 3000 DT
Страница 1: ...Version 1 7 ...