DigitalSpot 3000 DT
13
2- TD-
6- RX-
3- RX+
7- Not connected
4- Not connected
8- Not connected
Patch cables that connect fixtures to the hubs or LAN sockets are wired 1:1, that is, pins with the same numbers
are connected together:
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
If only the fixture and the computer are to be interconnected, no hubs or other active components are needed. A
cross-cable has to be used:
1-3
2-6
3-1
4-8
5-7
6-2
7-5
8-4
Ethernet operation.
Connect the Ethernet inputs of all fixtures in the fixture chain with the network.
Use the menu "Artnet Settings " to set an IP address , artnet universe and artnet subnet on all fixtures (see the
"Fixture address" menu).
The option “Activate Artnet mode" has to be confirmed in “Artnet Settings ” menu on all fixtures.
Example:
(DMX address=1)
DMX address=273
DMX address=137
DMX address=1
IP address=002.168.002.004
IP address=002.168.002.003
IP address=002.168.002.002
Artnet Universe=1
Artnet Universe=1
Artnet Universe=1
Artnet Subnet=0
Artnet Subnet=0
Artnet Subnet=0
Содержание DigitalSpot 3000 DT
Страница 1: ...Version 1 7 ...
