DigitalSpot 3000 DT
64
26. Projection onto angular, cylindric or spheric surfaces
If a projection on curved surface is required a correction of the shape distortions is necessary. The DigitalSpot 3000
DT supports projection onto angular screens, cylinders and spheres.
26.1 Curved surface support channels
Global effect 2
This channel enables you to select desired shape of the surface:
To simplify a correction process, there is a gobo with a net pattern (DMX value = 2) in a factory folder No. 20
(DMX value= 20) on a
Gobo folder selection
channel each gobo layer.
Global effect 2- parameter 1
This parameter enables to adjust the total length of the image edge. A value of 0 means no adjustment, a value of
255 means maximum correction.
Note. If a corner projection is selected on a
Global effect 1
(values of 1-4), the red guiding line will appear in the
image (the gobo with the net pattern has to be projected).
Guiding line
Содержание DigitalSpot 3000 DT
Страница 1: ...Version 1 7 ...