Robe DigitalSpot 3000 DT, Руководство пользователя

Страница: 24 / 113

DigitalSpot 3000 DT
24
Music Trigger --- Select this item to enable the sound control of the running programs via
the built-in microphone.
Play DMX Program --- Select this menu to run one of 10 programs which have been recorded via the menu
“Record DMX program” . By pressing the [ENTER] you can switch the running program into the 3 following modes:
Pause, Playing, Playing in Loop. The current program step is shown on the fixture display:
Record DMX Program
--- The menu allows to record DMX data that receives the fixture and then replay them again
via the menu “Play DMX program” . There is a list of 10 programs for recording with unlimited steps each.
Select desired program number and press the [ENTER] to enter the recording screen.
The data record starts after changing any receiving DMX value. To stop recording, press [ENTER] or [ESC].
Recorded DMX program has the name
dprg_xx.csv where the xx means the number of the program (e.g.
dpr_01.csv, dprg_02.csv....) and is stored in the folder “Programs” accessible by means of FTP. The format of this
file is a plain text that allows additional user editing. The first line of the file includes all DMX channels with their
starting DMX values and the next lines display changes of DMX values of channel effect and a relevant time of the
changes.
Note: If you select the program which contains previously recorded data, the data will be overwritten without
warning.
Preset playback
--- The menu allows to select a program (or a DMX program), which will be played automatically in
a loop after switching the fixture on.
Fixture Off Timer --- The menu offers to control the time during which the fixture is on and, for example, plays the
recorded program. The adjusted time period is counted from starting the fixture.
Timer Deactivated --- The item disables the “Fixture Off Timer” option.
Timer Activated --- Activate timer is signalled by the small icons at the top right corner of the screen.
Set Timer Hours --- The item enables to set hours for the “Fixture Off Timer”.
Set Timer Minutes --- The item enables to set minutes for the “Fixture Off Timer”.
15.7 Preview mode.
This item enables to display the image, going from the projector, on the fixture´s display.
Note: If this function is called out ,the video sequence from projector will not be played continuously because the
fixture´s processor has to display this sequence twice at the same time ( on the wall and on the display)
15.8 Reset functions
The DigitalSpot 3000 DT can be reset totally or in function modules. Select a desired function to run a reset:
Reset Graphics Engine --- This function resets a graphics engine.
Reset Pan/Tilt System --- This function resets a pan/tilt movement.