RITZ SIS BUS BAR SYSTEMS, Руководство по установке

Страница: 55 / 130

INSTALLATION
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05 55 / 130
Required tools and components
………
Fig. 33: Overview of material and tools
The following tools are required for installation:

Spanner, 19 mm width across flats, also 18 mm as necessary

Spanner, 17 mm width across flats, also 16 mm as necessary

Spanner, 13 mm width across flats

Socket spanner with nut, 19 mm width across flats, also 18 mm
as necessary

Torque spanner (calibrated)

Grinding sponge or grinding fleece (3M, red)
The following consumables are required for installation:

Acetone and a lint-free rag

"Gleitmo 815" high-performance grease paste

PFISTERER contact grease compound P1
Preparing the flange connections .........
Personnel:

Installation staff
Protective Equipment:

Occupational safety clothing

Safety goggles
  
Protective gloves
  
Safety footwear
Materials:
 
Grinding sponge or grinding fleece

Lint-free rag
1. Remove the transport securing device from the
flange connections (Fig. 34).
2. Remove the transport securing device from the
bus bar (Fig. 34).