INSTALLATION
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
76 / 130
Adapting the bellows
…………………… Personnel:
Installation Staff
Protective Equipment:
Occupational Safety Clothing
Protective Gloves
Safety Footwear
Special Tool:
Knife
The raised numbers on the outside of the bellows
indicate the inner diameter of the respective step.
Fig. 73: Bellows
1.
The raised numbers on the outside of the
bellows indicate the inner diameter of the respective
step.
Fig. 74: Cutting the bellows to size
2.
Cut off the bellows approximately 5 mm short of
the required size (Fig. 74).
Fig. 75: Bellows with protruding part
3.
Remove protruding parts of the bellows (Fig.
