SAFETY
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
13 / 130
WARNING!
Danger arising from misuse!
Misuse of the bus bar system can lead to hazardous
situations.
– Only operate bus bar systems in accordance
with the agreed terms and conditions of
delivery, and the indicated technical data.
– Install bus bar systems in accordance with
these installation instructions and drawings.
– The manufacturer's warranty will be
rendered null and void if the installation
instructions are not observed.
– Only use the devices and special tools
included in the scope of delivery for the
intended purpose and in accordance with the
stipulations of these installation instructions.
– Never climb on or walk on the bus bar
system.
– Never suspend loads from the installed bus
bar system or place objects on the bus bar
system.
– Never operate the bus bar system without
insulation or earthing.
– Refrain from performing cutting, grinding,
and welding work on or in the vicinity of bus
bar systems.
2.3
RESIDUAL RISKS
2.3.1
BASIC HAZARDS WHEN
PERFORMING INSTALLATION
Working in the construction site
………..
WARNING!
Danger arising from misuse!
Carelessness in the installation area on a
construction site can lead to hazardous situations.
– Never begin work on the construction site
without the permission of the construction
site supervisor.
– Always access construction sites with
extreme caution.
– Wear reflective clothing or a safety vest, as
necessary.
– Adhere to the national occupational safety
measures.
