SAFETY
Installation Instructions for SIS Bus Bar Systems A2MS001EN revision R05
16 / 130
Working at heights
……………………….
WARNING!
Risk of injury from careless work at heights!
Carelessness when working on ladders or lifting
plat- forms for installation or maintenance work can
cause injuries.
– When carrying out any work on ladders,
make sure the ladder is on a firm and even
surface.
– Adhere to the national regulations for
safety and the prevention of accidents
when performing any work with a scaffold
or lifting platform.
– If necessary, have a second person secure
the ladder.
– Wear a safety harness as necessary.
Suspended loads
…………………...…….
WARNING!
Risk of fatal injury from suspended loads!
When lifting loads, the loads may swing and fall.
This can cause serious or even fatal injuries.
– Never stand under or in the swinging range
of suspended loads.
– Only move loads under supervision.
– Use only approved lifting gear and
fastening equipment with sufficient load
bearing capacity.
– Do not use torn or frayed lifting gear, such
as rope or belts.
– Do not place lifting gear, such as ropes
and belts, over sharp edges and corners.
Do not knot or twist the lifting gear.
– Before leaving the work station, set the
load down.
